Choosing the right cable for Transit Projects

In this webinar you will learn about NFPA 130 cable requirement for non-emergency and emergency circuit and how to select the proper cable for your Canadian transit project. We will also review installation requirement for emergency circuit and how to design emergency lighting in tunnel using UL2196/ULC S139 fire resistive cable system.

Gabriel Senechal is the Technical Product Manager at CERCO Cable.

Gabriel describes himself as "Passionate and Nerd about fire protection, fire prevention, mass transit project and engineering." 

He offers presentations to engineers, government, code authorities and builders on NFPA 130 cable requirement, NFPA 502 cable requirement, ULC S139 system and firestop through penetrations system and building joints systems.

• NFPA 130 Principal
• SFPE Quebec Board member
• CFAA Director in Ontario, Atlantic and Quebec
• National research council of Canada - Fire protection
• Active in 7 different TC UL/ULC committee
• TC 0005 Raceways And Fitting
• TC 0674 Electric Motors And Generators For Hazardous Locations
• TC 0864 - Fire Protection Signaling Equipment
• TC 0924 - Emergency Lighting And Power Equipment
• TC 1479 - Fire Tests Of Through Penetration Firestops And Building Joint Systems
• TC 2196 - Fire Resistive Cables
• TC 2524 - In-Building 2-Way Emergency Radio Communication Enhancement Systems

Agenda :

NFPA 130 Non-emergency circuits

• Chapter 12 wiring requirements – Non-emergency
• FT4/IEEE 1202 vertical flame & smoke release test
• UL 1685 vertical flame & smoke release test
• Product Families – Non-emergency
• Different cable for different application and mission
• Questions ?

NFPA 130 Emergency Circuits

• NFPA 130 Chapter 12 wiring requirements – Emergency
• NFPA 130 Chapter 11 design and reliability
• NFPA 130 Chapter 5 & 6 emergency circuits
• NFPA 130 Chapter 10 fire alarm and communications cables
• Product families - Emergency
• Fire resistive testing to meet UL2196/ULC 139
• Installation requirement of fire resistive cable for emergency circuit
• Grounding and Bonding of fire resistive cable for emergency circuit
• ULC S139 Splice of fire resistive cable for emergency circuit.
• Design of lighting emergency circuit to meet NFPA 130
• VFD cabling option for Jet Fan
• Picture of installation and past project
• Different cable for different application and mission
• NFPA 130 / NFPA 502 Wire and Cable Summary
• Questions ?